Forum

In order to keep your lawn in good condition it is necessary to change the blades on your lawn mower at least once. It's simple to change the blades. It is all you need are some basic tools and a few easy steps.

The best lawn mower blades will have strong build materials that can make sure they last for a long time without getting rusted quickly. They should also be able to stand up to high amounts of force.

Deck Blade

 

 

The cutting blade is the most important element of a lawn mower. The blade is enclosed inside a casing that is known as the deck. It is available in a variety of shapes, sizes, and types. Each one has particular specifications and must be able to handle fast contact with grass and other things.

Standard blades have a curving surface that raises the grass and cuts it in a scissor-like action. The curved blade can also assist in dispersing the clippings. The blade is not as powerful than one with a higher lift and can be used on dusty or sandy terrain.

Cylinder or reel blades consist of spiral blades that are welded into the form of a circular reel that rotates. They are used on reels or gas-powered mowers. It's the most popular type and it's easy to change. The blades can be sharpened and rebalanced by many hardware or lawn-care stores at a nominal cost.

Standard Blade

 

 

The most common type of blade on lawn mowers is the flat blade. It is made to cut grass, however it does not have no special features such as bagging or mulching features. It has a low suction capacity and can be used on all kinds of grass.

High-lift blades are angled at their edges which permit maximum airflow. The blades create a vertical suction that pulls the grass to the deck. This creates a perfect finish to your Versatile lawn mower blade sharpener. These blades are also able to mowing on sandy surfaces.

When you use these lawn mower blades make sure the shear pin holes are aligned correctly with the center bolt hole of the mower. In the absence of this, the blade will not rest on the boss properly. The blade could get worn out quicker than you anticipate. To ensure that the shear pins are positioned properly, it is suggested to refer to the mower's manual or parts list for the exact location of the holes.

Lifting Blade

 

 

They are able to recirculate air, reducing the amount of clogging within the mower deck, while still delivering the highest quality cut. The blades are bent inward to create a vacuum that increases the grass's height and discharges it into your bagging system or to the side discharge.

These blades are also better in cutting grass that is longer than blades with a lower lift. They are also ideal for those who like to mulch their lawn clippings and are compatible with a 2-in-1 or 3-in-1 mower blade.

The only disadvantage of these blades is that they need an engine that is stronger to avoid straining the motor. These blades aren't suitable for use on dusty or sandy surfaces where sand, grit, and other particles can cause the deck to deteriorate more quickly.

Mulching Blade

 

 

A favorite choice for those who don't have a bagger, this blade allows the clippings to be discharged, mulched or ejected out of your mower's discharge chute. With larger "wind wings" that are larger than the ones found on regular lawn mower blades they create an efficient airflow under the grass clippings so they don't get kicked into the air and are able to safely be discharged out of your mower.

To make sure that your lawn mower's mulching blade has been installed correctly, inspect the bevel (the slope on the blade's edge responsible to cut) to ensure it is facing down to the ground when mowing. If not the sharp edge of the blade could scratch up your mower's deck. Also, make sure it's not bent to an awkward angle. This can make it unusable for cutting higher grass. This is typically a sign of a broken blade.